Mattress maintenance methods and tips(2)

Skill

Some springs have ventilation holes around the edges. Do not tighten the sheets and mattresses when using them, so as not to block the ventilation holes, which will cause the air in the mattress to not circulate and breed bacteria. You must understand and maintain the mattress with maintenance skills. The hygiene of the home environment.

1. Flip regularly. During the first year of purchase, the new mattress will be flipped every two to three months on the front, back, left, right, or head and feet, so that the spring force of the mattress will be even, and then it will be flipped about every six months.

2. Use better quality sheets to not only absorb sweat but also keep the cloth clean.

3. Keep it clean. Clean the mattress regularly with a vacuum cleaner, but do not wash it directly with water or detergent. At the same time, avoid lying on it immediately after taking a shower or sweating, not to use electrical appliances or smoking in bed.

4. Do not often sit on the edge of the bed, because the four corners of the mattress are the most vulnerable. Sitting and lying on the edge of the bed for a long time can easily damage the edge spring.

5. Do not jump on the bed to avoid damage to the ambassador spring due to a single point of force.

6. Remove the plastic packaging bag during use to keep the environment ventilated and dry, and avoid the mattress from getting wet. Do not expose the mattress to too long to discolor the fabric.

7. If you accidentally overturn other beverages such as tea or coffee on the bed, you should immediately use a towel or toilet paper to dry it with a heavy pressure, and then use a hairdryer to dry it. When the mattress is inadvertently contaminated with dirt, it can be washed with soap and water. Do not use strong acid or alkaline cleaners to avoid discoloration and damage to the mattress.

8. Avoid excessive deformation of the mattress during transportation, do not bend or fold the mattress;

9. Remove the plastic packaging film before use;

10. The cleaning pad or bed cover should be set up before use to ensure that the product is clean for a long time;

11. It is recommended that the mattress be adjusted and turned over regularly for about 3 to 4 months, so that the cushion surface is evenly stressed and the service life is extended;

12. Do not tighten the bed sheet and mattress when using it, so as not to block the ventilation holes of the mattress, resulting in air circulation in the mattress and breeding of bacteria. 6. Do not apply local stress on the cushion surface, so as not to cause the local depression of the mattress and affect the use;

13. Avoid scratching the fabric with sharp-angle tools or knives.